Polylactic acid non-woven fabric, PLA non-woven fabric is moisture-proof, breathable, flexible, lightweight, compostable, non-toxic and non irritating, with a variety of types. PLA non-woven fabric new material, mainly used for shopping bags, home decoration, aviation fabric, environmentally friendly filtration, sanitary materials and other diversified fabrics.
Spunlaced PLA corn fiber polylactic acid non-woven fabric
0001 pure water spunlace PLA corn fiber polylactic acid non-woven fabric, made of 1.2D38mm, 1.4D38mm, 1.5D * 38mm pure PLA polylactic acid short fibers, manufactured through water spunlace non-woven equipment. Advantages: Spunlaced PLA non-woven fabric has a soft hand feel, disadvantages: Currently, the weight can only reach 35 grams or more. Quanzhou Martin Company has developed a specialized polylactic acid short fiber for water splitting.
Needled PLA corn fiber polylactic acid non-woven fabric
00002. Pure needle punched PLA corn fiber polylactic acid non-woven fabric, made from single component pure PLA corn short fiber 2D51mm, 3D51mm, 4D51mm, 5D51mm, 6D51mm, mixed with 20% two-component low melting point PLA corn short fiber 2D51mm, 5D * 51mm. Advantages: Acupuncture can be used to make thick and heavy products, such as 500 grams of leather fabric. Disadvantage: Currently, the cost of polylactic acid is relatively high, and many people choose to blend polyester or other fibers, resulting in incomplete biodegradation. Quanzhou Martin Company developed it as early as August 2017. Mainly used in leather substrates, shoe materials, shoe midsole substrates, non-woven fabrics for edible oil filtration, new energy vehicle interior materials, etc.
Spunbond PLA corn fiber polylactic acid non-woven fabric
00003. Pure spunbond PLA corn fiber polylactic acid non-woven fabric is manufactured using spinning grade pure polylactic acid chips. It only takes 20 minutes from feeding to fabric formation. Due to the short process flow and low cost, it has formed industrialization. Advantages: The cost of mass production is very low, and it can be done very evenly with a small range of weight deviation; Disadvantage: It requires a sufficient quantity, at least 30 tons, to produce once. The thinnest 18g polylactic acid spunbond non-woven fabric from Quanzhou Martin Company is widely purchased by customers for tea bags, braised boiled bags, and traditional Chinese medicine bags.
Melt blown PLA corn fiber polylactic acid non-woven fabric
00004 Pure melt blown PLA corn fiber polylactic acid non-woven fabric. Made from PLA melt blown special raw materials, all PLA melt blown raw materials need to be modified to achieve a moisture content of less than 0.4%. The PLA melt blown non-woven fabric equipment is not simply modified by PP melt blown equipment, because PLA belongs to the polyester product category, similar to polyester. If the moisture content is too high in a high-temperature melting state, it will cause hydrolysis and cannot be used. So the PLA melt blown equipment needs to be dried before feeding. PP, due to its natural resistance to hydrolysis, does not require a drying system, which is one of the reasons why many people cannot make PLA melt blown. Quanzhou Martin Company began its market launch in September 2020. We have successively developed ordinary PFE90 and PFE 95 medical grade polylactic acid melt blown non-woven fabrics, which have been selected by major universities and brands in China.
Stitching PLA corn fiber polylactic acid non-woven fabric
00005 Pure sewn PLA corn fiber polylactic acid non-woven fabric. The stitched PLA corn fiber polylactic acid non-woven fabric is made of pure polylactic acid yarn 150D or 100D, polylactic acid short fiber 2D51mm, 5D * 51mm. Quanzhou Martin Company developed it in August 2017, mainly used in the fields of shoe materials, leather sole fabrics, etc.
Post time: Mar-30-2024