Liansheng non woven fabric is a new type of green and environmentally friendly material currently in circulation internationally, which is harmless to human health and the environment, and fully complies with environmental safety standards. Pure non-woven paper is used as the substrate, and the surface is printed with water-based ink and coated with special materials, which are processed through special procedures. It has the advantages of sound absorption, breathability, moisture dissipation, and no deformation. Simultaneously possessing the beauty of nature, antiquity, and ruggedness, rich in a strong pastoral atmosphere, giving people the feeling of being in the natural wilderness. However, non-woven wallpaper has relatively low water resistance due to the use of natural materials. Therefore, special attention should be paid during construction. The following are the precautions for non-woven wallpaper construction.
Treatment and requirements for walls
The wall must be flat and free from bumps, dirt, or peeling: the color of the wall should be uniform, smooth, clean, and dry, and the corners should be vertical; The wall should be treated with moisture-proof measures (after plastering, sand should be added and the wallpaper base film should be rolled without adding water); Before wallpaper construction, quality inspection should be carried out on the wall surface to ensure that it meets the requirements and is completely dry.
Construction Procedure
① Check the cutting paper:
Check the product identification and read the construction instructions. It is necessary to cut and use the product in the order of batch number, box number, and roll number. Calculate the length of the cut paper based on the height of the homework wall. The pattern above the wallpaper should be taken as a complete pattern and positioned appropriately. When cutting, compare the pattern with the previous product, ensure the correct position and appropriate length, and mark the direction at one end. When placing after cutting, the curvature should be enlarged as much as possible, and care should be taken not to cause creases that affect the decorative effect.
② Glue application:
Non woven paper wallpaper, due to its good breathability and strong moisture absorption, is different from other wallpapers. It should have thicker and more adhesive than other wallpapers to reduce its fluidity. The moisture content of the wallpaper adhesive should be reduced and evenly applied to the wall. Never brush the glue directly on the back of Texas non-woven fabric, and never wet it with water.
③ Post:
Starting from the corners of the room, paste and compare with an infrared level to measure (to prevent wallpaper from tilting due to uneven corners). Use a brown brush to flatten the wallpaper and scrape out bubbles. Do not use hard tools such as scrapers to prevent surface fiber fuzzing. The “↑↓” products should be laid in one direction and the other in the opposite direction, and each wallpaper should be sewn on the same side.
④ Seam treatment:
Use a soft rubber roller to compact the joint, and prohibit the overflow of glue at the joint to avoid affecting the product effect.
⑤ Wide width product construction:
The construction of wide non-woven paper requires edge stitching on the wall. When cutting or stitching, the sharp end of the blade should be kept sharp to avoid affecting the joint effect. To keep the seam vertical, use a tailor’s shovel or steel ruler to compare and prevent the problem of uneven seams and knife running. After trimming, take out the cut parts on both sides and press the joint with a soft rubber roller. It is forbidden to overflow the adhesive at the joint.
After construction
After the construction is completed, close the doors and windows tightly for 48 hours, strictly prohibit ventilation, and let the wallpaper dry naturally in the shade. To prevent uneven drying shrinkage and visible seams. If there is dust on the surface, use a short bristled brush or duster to gently brush it, and do not use a wet towel to wipe it, which may cause pollution to spread.
Non woven wallpaper is made of natural plant fibers such as cotton and linen that are formed through non-woven molding, making it a thoroughly environmentally friendly material. Pay attention to the above items during the construction of non-woven wallpaper, which can better showcase the advantages of non-woven wallpaper.
Dongguan Liansheng Nonwoven Fabric Co., Ltd., a manufacturer of non-woven fabrics and non-woven fabrics, is worthy of your trust!
Post time: Jul-28-2024